===============================================================================
                                W A V E C O M
===============================================================================

OPEN AT V2.10
Updated : May 15th, 2003

===============================================================================

(To print this file : use Notepad and remove all margins and default header.)

                       ---------------------------------
                              Content of this file
                       ---------------------------------

FCM highspeed Sample application description

I.      Changes
II.     Application description



   
I - Changes
===========

* 03/05/15  -   V2.10
  Initial revision.




II - Application description
============================

 This application performs high speed data sending tests on FCM flows.

 These tests are done with the AT+GO command defined bellow :
 
    AT+GO=[<flow>][,[<PacketsNb>][,[<PacketsSize>][,[<SendMethod>]]]]
 
        <flow> : flow on which test is performed
                 0 : GSM Data (a GSM data call must be running)
                 1 : GPRS
                 2 : V24 (default)
                 
        <PacketsNb> : number of packets to send for this test
                      (default : 10)
                      
        <PacketsSize> : size of each packet to send for this test
                        (default : 255)
                        
        <SendMethod> : method to use to send the packets
                       0 : wait the WM_OS_RELEASE_MEMORY message of previous
                           packet to send the next one (default)
                       1 : wait a 100ms timer to send the next packet
                       2 : wait a 18.5ms timer to send the next packet
 
 * Each packet is built on this scheme :
   \r\n
   <Packet Index>
   \r\n
   <template * packet size>
   
   where template is a letter ('a' for packet 0, 'b' for packet 1, etc...)
 
 * When all packets are sent, the flow buffer status is required until it is
   empty ; then a test report is displayed.
 
 * For GSM data flow, the report is displayed after the end of call.